Ricoh Pro C7100s Operating Instructions Manual page 144

4. Advanced Copying
• You can enter up to 64 characters.
• When Auto Clear is done, the [Reset] key is pressed, or the power is turned off, the text is cleared.
To save the typed text, you can register them in a program. For details about programs, see
"Registering Frequently Used Functions", Convenient Functions.
• Depending on the stamp position, parts of the text might not be copied.
• For details about stamp positions, see page 126 "Stamps".
• For details about how to enter text, see "Entering Text", Getting Started.
• You can change the settings for Stamp Text under [Stamp Text] in User Tools. For details, see
page 242 "Stamp Text".
Printing text and serial numbers
Before using this function, select [On] under [Change Job Serial No. for First Job] in User Tools. For
details, see page 242 "Stamp Text".
1. Press [Stamp].
2. Press [Stamp Text].
3. Press [Change Text].
4. Enter stamp text, and then press [OK].
5. Press [Change Start No.].
6. Enter a number from which to start numbering, and then press [ ].
7. Press [OK].
8. Press [Change].
142
CKN091