Ricoh Pro C7100s Operating Instructions Manual page 73

3. Select the folding direction, and then press [OK].
4. Place the originals, and then press the [Start] key.
• Folded copies that are delivered to the folding unit tray might be stacked with their folds open. If
this happens, the position of the folds is unaffected and the copies will still be output in order.
Stacked copies can be easily separated in the order they are delivered. To prevent their folded
sections overlapping, configure the machine to deliver folded copies to the finisher upper tray or
finisher shift tray.
• Remove the Z-fold support tray when delivering copies to the finisher shift tray or the folding unit
tray without using the Z-fold function. If you leave the Z-fold support tray in place, prints are not
stacked properly.
• You can staple Z-folded copies. For details about the number and the paper sizes of Z-folded
copies that can be stapled, see "Specifications", Maintenance and Specifications.
• Even if you place different size originals in the ADF, appropriate size of copy paper can be
automatically selected and Z-folded using the Mixed Sizes mode and Auto Paper Select function.
• When you copy different size originals, such as A3 and A4 (11 × 17 and 8
function with Mixed Sizes mode. Copies of the large size original are Z-folded and will be the
same size as the copy of the small size original. For details about the paper sizes you can use
together, see "Specifications", Maintenance and Specifications.
• When using this function with 1 Sided
originals of each size are in even numbers. If you have an odd number of originals, insert blank
sheets to adjust the total.
CNP012
2 Sided and Mixed Sizes modes, always ensure that the
Finishing
1
/ × 11), use this
2
71