Copies can be reduced or enlarged at different reproduction ratios horizontally and vertically.
: Horizontal length
: Vertical length
Specify length and width of the originals and the copies.
1.
Press [Reduce/ Enlarge].
2.
Press [Dir. Size Mag. mm].
3.
Enter the horizontal size of the original with the number keys, and then press [ ].
4.
Enter the horizontal size of the copy with the number keys, and then press [ ].
5.
Enter the vertical size of the original with the number keys, and then press [ ].
6.
Enter the vertical size of the copy with the number keys, and then press [ ].
7.
Press [OK] twice.
CKN026
Advanced Reduce/Enlarge Copying
123