Ricoh Pro C7100s Operating Instructions Manual page 246

6. Copier / Document Server Features
Stamp positions
Top Left
Top Center
Top Right
Bottom Left
Bottom Center
Bottom Right
• Page to Stamp
You can have the stamp printed on the first page or all pages.
Default: [All Pages]
• Adj. Back Side Stamp Position
You can adjust the stamp position for back side in duplex mode, within the available range as
shown below.
•
Left-Right: Left 432 mm–Right 432 mm
Top-Bottom: Top 432 mm–Bottom 432 mm
Default: [0 mm]
244
Default
1.3 inches from the left
edge
0.3 inches from the top
edge
Center
0.3 inches from the top
edge
0.5 inches from the right
edge
0.3 inches from the top
edge
1.3 inches from the left
edge
0.3 inches from the bottom
edge
Center
0.3 inches from the bottom
edge
0.5 inches from the right
edge
0.3 inches from the bottom
edge
(mainly Europe and Asia)
Possible range
From 0.2 to 5.7 inches from the left edge
From 0.2 to 5.7 inches from the top edge
From 0 to 2.8 inches to the right or left of
the center
From 0.2 to 5.7 inches from the top edge
From 0.2 to 5.7 inches from the right
edge
From 0.2 to 5.7 inches from the top edge
From 0.2 to 5.7 inches from the left edge
From 0.2 to 5.7 inches from the bottom
edge
From 0 to 2.8 inches to the right or left of
the center
From 0.2 to 5.7 inches from the bottom
edge
From 0.2 to 5.7 inches from the right
edge
From 0.2 to 5.7 inches from the bottom
edge