9.
Press [OK] twice.
• For details about stamp positions, see page 126 "Stamps".
• You can change the settings for User Stamp under [User Stamp] in User Tools. For details, see
page 233 "User Stamp".
Registering a user stamp
User Stamp is used to register an image that is used as a user stamp. Place the original of the image that
you want to register as a user stamp on the exposure glass.
The size range for stamp images is 10–297 mm (0.4–11.7 inches) high and 10–432 mm (0.4–17.0
inches) wide. However, if the stamp's size exceeds the maximum value of the area (5000 mm
2
inch
), it will be automatically corrected to a size that is within the range of the area.
CKN030
: Horizontal size
: Vertical size
Up to five frequently used images can be stored in memory.
• User stamps will be one color even if the originals were full color.
1.
Press the [User Tools] key.
CWW222
Stamps
2
, 7.75
131