Ricoh Pro C7100s Operating Instructions Manual page 105

4. Adjust the color balance by pressing [Lighter] or [Darker].
5. Press [OK] twice.
• When Auto Clear is done, the [Reset] key is pressed, or the power is turned off, the adjusted
settings will be deleted and the initial values will be reset.
Registering the adjusted color balance
Register adjusted color balance settings so that you can use them later.
You can store up to three programs.
1. Press [Edit / Color].
2. Press [Color].
3. Press [Adjust Color].
4. Adjust the color balance.
5. Press [Program Color Balance].
6. Press [Program].
7. Select a program number.
8. Press [OK] twice.
• If you want to change the registered settings, register them one more time. In this case, the
previously registered settings will be overwritten.
• If you select the program number key where
be overwritten.
• For details about how to adjust the color balance, see page 102 "Color Balance".
is displayed, the previously registered settings will
Adjusting Color
103