4. Advanced Copying
• You cannot use this function from the ADF.
1.
Measure the length from the base point to the area that you want to copy repeatedly (X1,
Y1) and the length and width of the area (X2, Y2).
2.
Press [Edit / Color].
3.
If [Margin Adj.] is selected, press [Margin Adj.] to cancel it.
4.
Press [Edit Image].
5.
Press [Image Repeat].
6.
Press [Specified Area].
7.
Enter the length of [X1] with number keys, and then press [ ].
8.
Enter the length of [Y1] with the number keys, and then press [ ].
9.
Enter the length of [X2] with the number keys, and then press [ ].
10.
Enter the length of [Y2] with the number keys, and then press [ ].
11.
Press [OK] twice.
12.
Select the size of copy paper and the reproduction ratio.
158