Ricoh Pro C7100s Operating Instructions Manual page 242

6. Copier / Document Server Features
• Stamp Position
Specify where to print the stamp. For details about the stamp position, see page 126
"Stamps".
Default for the patterns of [P1,P2...], [1/5,2/5...], [P.1,P.2...], and [1,2...]: [Top Right]
Default for the patterns of [-1-,-2-...] and [1-1,1-2...]: [Bottom Center]
• Adjust Stamp Position
You can adjust the position in which the stamp is printed.
The position where the stamp is printed and the range within which that position can be
adjusted are shown in the following table. The values for defaults and possible ranges given in
the table are the distance from each side of the paper.
Stamp positions
Top Left
Top Center
Top Right
Bottom Left
Bottom Center
Bottom Right
240
(mainly Europe and Asia)
Default
12 mm from the left edge
12 mm from the top edge
Center
12 mm from the top edge
12 mm from the right edge
12 mm from the top edge
12 mm from the left edge
8 mm from the bottom edge
Center
8 mm from the bottom edge
12 mm from the right edge
8 mm from the bottom edge
(mainly North America)
Possible range
From 5 to 144 mm from the left edge
From 5 to 144 mm from the top edge
From 0 to 72 mm to the right or left of
the center
From 5 to 144 mm from the top edge
From 5 to 144 mm from the right edge
From 5 to 144 mm from the top edge
From 5 to 144 mm from the left edge
From 5 to 144 mm from the bottom
edge
From 0 to 72 mm to the right or left of
the center
From 5 to 144 mm from the bottom
edge
From 5 to 144 mm from the right edge
From 5 to 144 mm from the bottom
edge