Ricoh Pro C7100s Operating Instructions Manual page 45

To specify a reproduction ratio, enter the ratio using the number keys or specify the ratio with [ ] or
[ ].
This section describes how to enter the ratio using the number keys.
1. Press [Reduce/ Enlarge].
2. Press [Number keys].
3. Enter the desired ratio with the number keys, and then press [ ].
4. Press [OK] twice.
5. Place the originals, and then press the [Start] key.
• When specifying the ratio with [ ] or [ ], press [Reduce/ Enlarge], and then select a preset ratio
which is close to the desired ratio. Pressing [ ] or [ ] changes the ratio in increments of 1%.
Pressing and holding down [ ] or [ ] changes it in increments of 10%.
Reducing or Enlarging Originals
CKN007
43