Ricoh Pro C7100s Operating Instructions Manual page 177

1. Press [Cover/ Slip Sheet].
2. Select [Copy] or [Blank] for the cover sheet.
3. Press [OK].
4. Select the main sheet tray that contains the paper to copy the originals.
• When you specify both front and back covers, the first and last pages of your original are copied
on paper specified for use as a cover. When selecting [Blank] for the front cover and the back
cover, cover sheets are inserted before the first copy and after the last copy.
• You can use paper of different size and orientation than the main sheets as the front cover sheet.
• The back cover sheet should be the same size and orientation as the main sheets.
• When stapling copies with the front cover whose size and orientation is different from the main
sheets, the front cover sheet should be the same width in paper feed direction as the main sheets.
• If you have selected the interposer for trays for covers under [Tray Paper Settings], you cannot
copy onto the cover sheets.
• When selecting [Copy], select whether the front and back covers are copied one-sided or two-
sided.
• If [Blank] is selected, the cover will not be counted as a copy.
• You can make a combined copy on the front cover sheet. For details about [Front Cover Copy in
Combine], see page 223 "Edit".
Advanced Copier Functions
175