Ricoh Pro C7100s Operating Instructions Manual page 59

• If you are copying from the exposure glass, a single copy of each original is made first. If the first
copy set is acceptable, you can make the remaining copy sets by pressing the [ ] key. The time
required for copy sets to be delivered varies depending on the print settings.
• When the number of copies exceeds capacity, copying stops. If this happens, remove copies from
the tray to resume copying.
• For details about the number of copy sheets that the output tray can accommodate, and paper
sizes and orientations that can be shifted when delivered to the shift tray, see "Specifications",
Maintenance and Specifications.
• You can change the settings for the Sort function under [Input / Output] in User Tools. For details,
see page 246 "Input / Output".
• To specify whether or not sets are shifted, use the [Output/ Cstmz.] tab or the [Input / Output]
setting in User Tools. For details, see page 59 "Shift tray off in sort/stack" or page 246 "Input /
Output".
Sample Copy
Use this function to check the copy settings before making a long copy run.
• This function can be used only when the Sort function is selected.
1. Select Sort and any other necessary functions, and then place the originals.
2. Enter the number of copy sets with the number keys.
3. Press the [Sample Copy] key.
One copy set is delivered as a sample.
4. If the sample is acceptable, press [Continue].
The number of copies made is the number specified, minus one for the proof copy.
CWR086
Finishing
57