Ricoh Pro C7100s Operating Instructions Manual page 65

*2 You cannot staple at this position when copying onto B4 JIS, 8 × 13 or larger.
*3 If you want to staple at this position, select unreadable orientation in [Original Orientation], and then
select Top 2.
*4 You can select this position only when Booklet Finisher SR5060 is installed.
1. Select one of the stapling positions.
When you select a staple position, Sort is automatically selected.
2. Enter the number of copy sets with the number keys.
3. Place the originals, and then press the [Start] key.
• The following type of paper cannot be stapled:
• Translucent paper
• Transparencies
• Label paper (adhesive labels)
• Envelopes
• Tab stock
• High-gloss coated paper
• Textured paper
• Magnet paper
• Metallic/pearl paper
• Clear file folder
• Synthetic paper
• Curled paper
• Paper of low stiffness
• You cannot change staple positions during copying.
• When stapling B4 JIS , 8
plate of the finisher tray.
1
/ × 14 or larger paper sizes, be sure to extend the paper support
2
Finishing
63