Ricoh Pro C7100s Operating Instructions Manual page 243

Stamp positions
Top Left 0.5 inches from the left edge
0.5 inches from the top
edge
Top Center Center
0.5 inches from the top
edge
Top Right 0.5 inches from the right
edge
0.5 inches from the top
edge
Bottom Left 0.5 inches from the left edge
0.3 inches from the bottom
edge
Bottom Center Center
0.3 inches from the bottom
edge
Bottom Right 0.5 inches from the right
edge
0.3 inches from the bottom
edge
• Adj. Back Side Stamp Position
You can adjust the stamp position for back side in duplex mode, within the available range as
shown below.
• (mainly Europe and Asia)
Left-Right: Left 432 mm–Right 432 mm
Top-Bottom: Top 432 mm–Bottom 432 mm
Default: [0 mm]
• (mainly North America)
Left-Right: Left 17.0 inches–Right 17.0 inches
Default
From 0.2 to 5.7 inches from the left
edge
From 0.2 to 5.7 inches from the top
edge
From 0 to 2.8 inches to the right or left
of the center
From 0.2 to 5.7 inches from the top
edge
From 0.2 to 5.7 inches from the right
edge
From 0.2 to 5.7 inches from the top
edge
From 0.2 to 5.7 inches from the left
edge
From 0.2 to 5.7 inches from the bottom
edge
From 0 to 2.8 inches to the right or left
of the center
From 0.2 to 5.7 inches from the bottom
edge
From 0.2 to 5.7 inches from the right
edge
From 0.2 to 5.7 inches from the bottom
edge
Stamp
Possible range
241