9.
Select the stamp position, and then press [OK].
10.
Press [Stamp Color].
11.
Select the stamp color, and then press [OK].
12.
Press [OK] twice.
• Stamps may consist of up to 55 alphanumeric characters and symbols, and a numeric series of up
to 9 digits for a total of 64 characters.
• The number is displayed in nine digits. If you enter "1", the number is printed as "000000001".
• When Auto Clear is done, the [Reset] key is pressed, or the power is turned off, the text is cleared
and the next number in the sequence is displayed.
• This function cannot be used for the Job Preset or Interrupt Copy function. Also, this function cannot
be used to print stored documents.
• If this function is used with the Combine function, a print image may differ according to the [Page
Numbering in Combine] settings under [Page Numbering]. For details, see page 135 "Page
Numbering".
• For details about Stamp Text, see page 140 "Stamp Text".
Stamps
143