Ricoh Pro C7100s Operating Instructions Manual page 234

6. Copier / Document Server Features
You can select the size of the stamp.
Default: [1 X]
• Density
You can select the pattern used to print the stamp.
Default: [Normal]
• Normal
The stamp is printed on the image. You cannot check which parts will overlap.
• Lighter
The image can be seen through the stamp.
• Lightest
The image appears even clearer than in the Lighter setting.
• Page to Stamp
You can have the stamp printed on the first page or all pages.
Default: [All Pages]
• Adj. Back Side Stamp Position
You can adjust the stamp position for back side in duplex mode, within the available range as
shown below.
•
Left-Right: Left 432 mm–Right 432 mm
Top-Bottom: Top 432 mm–Bottom 432 mm
Default: [0 mm]
•
Left-Right: Left 17.0 inches–Right 17.0 inches
Top-Bottom: Top 17.0 inches–Bottom 17.0 inches
Default: [0.0 inch]
Stamp Color
You can select the stamp print color.
Default: [Black]
• For details about how to change the Copier / Document Server Features, see "Accessing User
Tools", Connecting the Machine/ System Settings.
232
(mainly Europe and Asia)
(mainly North America)