Ricoh Pro C7100s Operating Instructions Manual page 159

1. Press [Edit / Color].
2. Press [Edit Image].
3. Press [Image Repeat].
4. Make sure that [Whole Area] is selected, and then press [OK].
5. Press [OK].
6. Select the size of copy paper and the reproduction ratio.
Specified Area Repeat
Repeatedly copies a specified portion of the image.
To specify the area you want to repeat, you have to define the value of X1, Y1, X2, and Y2 on the
original. Measure the area you want to specify before entering the area settings.
The values are entered as follows:
X1: 0–412 mm (0.0–16.2 inches)
X2: 20–432 mm (0.8–17.0 inches)
Y1: 0–277 mm (0.0–10.8 inches)
Y2: 20–297 mm (0.8–11.6 inches)
Advanced Copier Functions
CKN043
157