Ricoh Pro C7100s Operating Instructions Manual page 68

2. Basic Copying
Original orientation and punch hole position
Place all the originals in the ADF in the orientation in which they can be read normally. When
placing the original on the exposure glass, keep the same orientation, but place the original facing
downwards.
When the paper that is loaded is the same size and orientation as the original, the relationship
between the orientation in which you place the original and the punch hole positions is as follows.
You can confirm the punch hole positions that can be selected on the screen that appears when
[Punch Type] under [Input / Output] is pressed.
Left 2
Top 2
Right 2
Left 3
Top 3
Right 3
66
Original Original
Orientation Orientation
Original Original
Orientation Orientation
Punch hole
*1
position
*2
*3
*2*3
*2
*2
*3
*2*3
*2