3. Color Copying
Changing the color balance
Changes the settings stored in color balance programs.
1.
Press [Edit / Color].
2.
Press [Color].
3.
Press [Adjust Color].
4.
Press [Program Color Balance].
5.
Select the program number to be changed.
6.
Change the registered settings.
7.
Press [Program Color Balance].
8.
Press [Program], and then press the program number to be overwritten.
9.
Press [Yes].
10.
Press [OK] twice.
Recalling the color balance
Applies settings registered in color balance programs to the copy job.
1.
Press [Edit / Color].
2.
Press [Color].
3.
Press [Adjust Color].
4.
Press [Program Color Balance].
5.
Select the program number you want to use.
6.
Press [OK] twice.
• When Auto Clear is done, the [Reset] key is pressed, or the power is turned off, the adjusted
settings will be deleted and the initial values will be reset.
Deleting the color balance
Deletes the settings stored in color balance programs.
1.
Press [Edit / Color].
2.
Press [Color].
3.
Press [Adjust Color].
4.
Press [Program Color Balance].
5.
Press [Delete], and then select the program number you want to delete.
104