2. Basic Copying
Specifying the finishing size
Specify the size of the finished bound booklets to determine the position where you want to cut the fore
edge.
1.
Press [Cut Fore Edge].
2.
Press [Specify Finishing Size].
3.
Enter the required finishing size using the number keys, and then press [ ].
• You can adjust the finishing size from 139.7 to 216.0 mm (5.50 to 8.50 inches) in 0.1 mm (0.01
inches) increments.
• For details about how to perfect bind, see page 83 "Perfect Binding".
Specifying the three edge cut
Use the following procedure to specify the three edge cut when perfect binding is applied.
88