Chrysler Concorde 2004 Service Manual page 1587

LH
TRANSMISSION OIL COOLER
LINES
REMOVAL
(1) Loosen hose clamps at radiator connections and
remove cooler hoses (Fig. 5).
(2) Remove lines from transmission.
(3) Remove lines from supports.
INSPECTION
Inspect all cooler lines and clamps. Replace as nec-
essary.
1 - RADIATOR
2 - TRANSMISSION OIL COOLER SUPPLY LINE TO IN-TANK
COOLER
3 - FROM IN-TANK COOLER TO EXTERNAL OIL COOLER
INSTALLATION
sion. Torque flare nuts at transmission to 30 N·m
(260 in. lbs.).
Tighten hose clamps to 3 N·m (28 in. lbs.).
Adjust as necessary.
Fig. 5 TRANSMISSION OIL COOLER
4 - TRANSMISSION OIL RETURN LINE
5 - TRANSMISSION OIL SUPPLY LINE TO IN-TANK OIL COOLER
6 - EXTERNAL TRANSMISSION OIL COOLER
(1) Position cooler lines and connect to transmis-
(2) Connect cooler lines to supports.
(3) Connect cooler hoses to radiator (Fig. 5).
(4) Start engine and check transmission fluid level.
TRANSMISSION 7 - 41