2.
5.1.6
Enable or disable the display backlight
Display
ProLink III
Field Communicator Configure > Manual Setup > Display > Backlight
Fieldbus host
Overview
You can enable or disable the display backlight.
Procedure
Enable or disable Backlight.
The default setting is Enabled.
5.1.7
Enable or disable Status LED Blinking
Display
ProLink III
Field Communicator Configure > Manual Setup > Display > Display Variable Menu Features > Status LED Blink-
Fieldbus host
Overview
By default, the status LED blinks (flashes) to indicate unacknowledged alarms. If you
disable Status LED Blinking, the status LED does not blink, whether alarms are
acknowledged or not. It still changes color to indicate active alarms.
Procedure
Enable or disable Status LED Blinking.
The default setting is Enabled.
Configuration and Use Manual
If you enabled Auto Scroll, set Scroll Rate as desired.
The default value is 10 seconds.
Tip
Scroll Rate may not be available until you apply Auto Scroll.
OFF-LINE MAINT > OFF-LINE CONFG > DISPLAY > BKLT
Device Tools > Configuration > Transmitter Display > General
LDO TB > LDO_BACKLIGHT_ON (OD Index 23)
Not available
Device Tools > Configuration > Transmitter Display > General
ing
LDO TB > UI_EnableStatusLedBlinking (OD Index 43)
Configure device options and preferences
59