Before You Begin; About This Manual; Communication Methods - Emerson Micro Motion 2700 Configuration And Use Manual

1

Before you begin

Topics covered in this chapter:
•
•
•
1.1

About this manual

This manual helps you configure, commission, use, maintain, and troubleshoot
Micro Motion Model 2700 transmitters with FOUNDATION
Important
This manual assumes that the following conditions apply:
•
•
•
1.2

Communication methods

You can use several different communications methods to interface with the transmitter.
You may use different methods in different locations or for different tasks.
Interface
Display
Universal Service Port
FOUNDATION Fieldbus channel FOUNDATION fieldbus (FF) host.
Configuration and Use Manual
About this manual
Communication methods
Additional documentation and resources
The transmitter has been installed correctly and completely according to the instructions in
the transmitter installation manual
The installation complies with all applicable safety requirements
The user is trained in local and corporate safety standards
Tool
Infrared-sensitive buttons
ProLink III
• On an enhanced FF host, the transmitter parameters are dis-
played either in the form of a menu tree (for example, the
475 Field Communicator) or in the form of UIRD (for exam-
ple, the AMS Intelligent Device Manager with DeltaV
tem). Both the menu tree and UIRD are provided as part of
the Device Description.
• A basic FF host displays the transmitter parameters in the
form of a list under the Resource block and transducer
blocks.
The configuration sections contain information for both types of
host.
Before you begin
™
fieldbus.
™
Sys-
3