Restore The Factory Configuration; Enable Or Disable Fieldbus Write Lock - Emerson Micro Motion 2700 Configuration And Use Manual

3.7

Restore the factory configuration

Display
ProLink III
Field Communicator Service Tools > Maintenance > Reset/Restore > Master Reset
Fieldbus host
Overview
Restoring the factory configuration returns the transmitter to a known operational
configuration. This may be useful if you experience problems during configuration.
Important
You cannot restore factory configurations with a 700 core.
Tip
Restoring the factory configuration is not a common action. You may want to contact customer
support to see if there is a preferred method to resolve any issues.
3.8

Enable or disable fieldbus write lock

When locked, the fieldbus write lock prevents any configuration changes being written
from the fieldbus segment.
Set the Write Lock paramater (OD index 34) of the Resource block to Locked (1) or
Unlocked (0).
Configuration and Use Manual
Not available
Device Tools > Configuration Transfer > Restore Factory Configuration
Diagnostic TB > Restore Factory Config (OD Index 056)
Introduction to configuration and commissioning
15