Configure Sensor Serial Number; Configure Sensor Material - Emerson Micro Motion 2700 Configuration And Use Manual

Configure device options and preferences
5.6.1

Configure Sensor Serial Number

Display
ProLink III
Field Communicator Configure > Manual Setup > Info Parameters > Sensor Information > Sensor Serial Num-
Fieldbus host
Overview
Sensor Serial Number lets you store the serial number of the sensor component of your
flowmeter in transmitter memory. This parameter is not used in processing and is not
required.
Procedure
1.
2.
5.6.2

Configure Sensor Material

Display
ProLink III
Field Communicator Configure > Manual Setup > Info Parameters > Sensor Information > Tube Wetted Mate-
Fieldbus host
Overview
Sensor Material lets you store the type of material used for your sensor's wetted parts in
transmitter memory. This parameter is not used in processing and is not required.
Procedure
1.
2.
68
Not available
Device Tools > Configuration > Informational Parameters > Sensor
ber
Device Info TB > SENSOR_SN (OD Index 20)
Obtain the sensor serial number from your sensor tag.
Enter the serial number in the Sensor Serial Number field.
Not available
Device Tools > Configuration > Informational Parameters > Sensor
rial
Device Info TB > SENSOR_MATERIAL (OD Index 23)
Obtain the material used for your sensor's wetted parts from the documents
shipped with your sensor, or from a code in the sensor model number.
To interpret the model number, refer to the product data sheet for your sensor.
Set Sensor Material to the appropriate option.
Micro Motion Model 2700 Transmitters with FOUNDATION Fieldbus