Reset Totalizers Using The Display - Emerson Micro Motion 2700 Configuration And Use Manual

Transmitter operation
7.7.1

Reset totalizers using the display

Prerequisites
•
•
Procedure
•
•
•
86
The Totalizer Reset display function must be enabled.
The totalizer that you want to reset must be configured as a display variable. For
example:
- If you want to reset the mass totalizer, Mass Total must be configured as a
display variable.
- If you want to reset the volume totalizer, Volume Total must be configured as a
display variable.
To reset the mass totalizer:
1. Scroll until the mass totalizer value appears.
2. Select.
Exit displays beneath the current totalizer value.
3. Scroll until Reset displays beneath the current totalizer value.
4. Select.
Reset and Yes? alternately flash beneath the current totalizer value.
5. Select again to confirm.
6. Scroll to EXIT.
7. Select.
To reset the volume totalizer:
1. Scroll until the volume totalizer value appears.
2. Select.
Exit displays beneath the current totalizer value.
3. Scroll until Reset displays beneath the current totalizer value.
4. Select.
Reset and Yes? alternately flash beneath the current totalizer value.
5. Select again to confirm.
6. Scroll to EXIT.
7. Select.
To reset the gas standard volume totalizer:
1. Scroll until the gas standard volume totalizer value appears.
2. Select.
Micro Motion Model 2700 Transmitters with FOUNDATION Fieldbus