Appendix H Transmitter Components And Installation Wiring; Installation Types - Emerson Micro Motion 2700 Configuration And Use Manual

Appendix H
Transmitter components and installation
wiring
Topics covered in this appendix:
•
•
•
H.1

Installation types

The transmitter was ordered and shipped to be installed in one of several possible
configurations.
Figure H-1:
The transmitter is mounted directly to the sensor. Integral installations do not require separate transmitter
installation. Power supply must be field wired to the transmitter.
A.
B.
Configuration and Use Manual
Installation types
Power supply terminals and ground
Fieldbus wiring terminals
Integral installation
A
B
Transmitter
Sensor
Transmitter components and installation wiring
319