Reset Inventories - Emerson Micro Motion 2700 Configuration And Use Manual

7.8

Reset inventories

ProLink III
Overview
When you reset an inventory, the transmitter sets its value to 0. It does not matter
whether the inventory is started or stopped. If the inventory is started, it continues to track
process measurement.
Tip
Mass and volume inventory totals cannot be set separately. They can only be reset together
simultaneously.
Prerequisites
To use ProLink III to reset the inventories, the feature must be enabled.
•
Once enabled, this feature remains enabled until it is disabled.
Configuration and Use Manual
Exit displays beneath the current totalizer value.
3. Scroll until Reset displays beneath the current totalizer value.
4. Select.
Reset and Yes? alternately flash beneath the current totalizer value.
5. Select again to confirm.
6. Scroll to EXIT.
7. Select.
Device Tools > Totalizer Control > Totalizer and Inventories > Reset Mass Inventory
Device Tools > Totalizer Control > Totalizer and Inventories > Reset Volume Inventory
Device Tools > Totalizer Control > Totalizer and Inventories > Reset Gas Inventory
Device Tools > Totalizer Control > Totalizer and Inventories > Reset All Inventories
To enable inventory reset in ProLink III:
1. Choose Tools > Options.
2. Select Reset Inventories from ProLink III.
3. Select OK.
Transmitter operation
87