Configure Device Options And Preferences; Configure The Transmitter Display; Configure The Language Used For The Display - Emerson Micro Motion 2700 Configuration And Use Manual

5 Configure device options and
preferences
Topics covered in this chapter:
•
•
•
•
•
•
5.1

Configure the transmitter display

You can control the process variables shown on the display and a variety of display
behaviors.
5.1.1

Configure the language used for the display

Display
ProLink III
Field Communicator Configure > Manual Setup > Display > Language
Fieldbus host
Overview
Display Language controls the language used for process data and menus on the display.
Procedure
Select the language you want to use.
The languages available depend on your transmitter model and version.
Configuration and Use Manual
Configure the transmitter display
Enable or disable operator actions from the display
Configure security for the display menus
Configure response time parameters
Configure alert handling
Configure informational parameters
OFF-LINE MAINT > OFF-LINE CONFG > DISPLAY > LANG
Device Tools > Configuration > Transmitter Display > General
LDO TB > UI_Language (OD Index 24)

Configure device options and preferences

55