Appendix E Transmitter Components And Installation Wiring; Input/Output (I/O) Terminals - Emerson Micro Motion 9739 MVD Configuration And Use Manual

Configuration and Use Manual
MMI-20016855
E Transmitter components and installation
wiring
E.1 Input/output (I/O) terminals
The I/O terminals are used to connect the transmitter to remote devices such as other transmitters or valves,
or to hosts.
CAUTION
Refer to the Micro Motion 9739 MVD Transmitters: Installation Manual for all safety and detailed wiring
information for the 9739 MVD transmitter. You are responsible for following all safety and wiring
instructions documented in the transmitter installation manual, plus any additional site requirements.
Terminal
14
15
16
17
18
19
20
21 and 16
22 and 16
23
Configuration and Use Manual
Transmitter components and installation wiring
Function
Contact the factory
Frequency Output (+)
Return (FO, DO, and DI)
Primary variable (PV+) mA Output
Primary variable (PV–) mA Output
Secondary variable (SV+) mA Output
Secondary variable (SV–) mA Output
Discrete Input (Zero) (+)
Discrete Output (Control output)
Signal ground
June 2019
199