Appendix E Transmitter Components And Installation Wiring; Installation Types - Emerson Micro Motion 2700 Configuration And Use Manual

Appendix E
Transmitter components and installation
wiring
Topics covered in this appendix:
•
•
•
E.1

Installation types

The transmitter was ordered and shipped to be installed in one of several possible
configurations.
Figure E-1:
The transmitter is mounted directly to the sensor. Integral installations do not require separate transmitter
installation. Power supply and I/O must be field wired to the transmitter.
A.
B.
Configuration and Use Manual
Installation types
Power supply terminals and ground
Input/output (I/O) wiring terminals
Integral installation
A
B
Transmitter
Sensor
Transmitter components and installation wiring
247