Charging The Battery Pack - Sony DCR- TRV24E Operating Instructions Manual

Step 1 Preparing the power
supply

Charging the battery pack

Use the battery pack after charging it for your
camcorder.
Your camcorder operates only with the
"InfoLITHIUM" battery pack (M series).
See page 276 for details of "InfoLITHIUM"
battery pack.
(1) Open the DC IN jack cover. Connect the AC
power adaptor supplied with your camcorder
to the DC IN jack on your camcorder with the
plug's v mark facing up.
(2) Connect the mains lead to the AC power
adaptor.
(3) Connect the mains lead to the wall socket.
(4) Set the POWER switch to OFF (CHG).
Charging begins. The remaining battery time
is indicated in minutes on the display
window.
When the remaining battery indicator changes to
, normal charge is completed. To fully charge
the battery (full charge), leave the battery pack
attached for about one hour after normal charge
is completed until FULL appears in the display
window. Fully charging the battery allows you to
use the battery longer than usual.
2
The number in the illustration of the display
window may differ from that on your camcorder.
(1)
v
(2)
(3)
(4)
1
4
VCR
OFF(CHG)
CAMERA
MEMORY
25