Sony DCR- TRV24E Operating Instructions Manual page 115

Dubbing only desired scenes
– Digital program editing (on
tapes)
Operation 1: Making the
programme
(1) Insert the tape for playback into your
camcorder, and insert a tape for recording
into the VCR.
(2) Press MENU, then select VIDEO EDIT in
with the SEL/PUSH EXEC dial.
(3) Turn the SEL/PUSH EXEC dial to select
TAPE, then press the dial (except DCR-
TRV16E/TRV116E).
(4) Search for the beginning of the first scene you
want to insert using the video operation
buttons, then pause playback.
You can fine-adjust one frame at a time with
EDITSEARCH.
(5) Turn the SEL/PUSH EXEC dial to select
MARK, then press the dial.
The IN point of the first programme is set,
and the top part of the programme mark
changes to light blue.
(6) Search for the end of the first scene you want
to insert using the video operation buttons,
then pause playback.
(7) Turn the SEL/PUSH EXEC dial to select
MARK, then press the dial.
The OUT point of the first programme is set,
then the bottom part of the programme mark
changes to light blue.
(8) Repeat steps 4 to 7, then set the programme.
When the programme is set, the programme
mark changes to light blue.
You can set up to 20 programmes in
maximum.
1
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
115