Sony DCR- TRV24E Operating Instructions Manual page 117

Dubbing only desired scenes
– Digital program editing (on
tapes)
Erasing all programmes
(1) Select VIDEO EDIT in the menu settings.
(2) Turn the SEL/PUSH EXEC dial to select
TAPE, then press the dial (except DCR-
TRV16E/TRV116E).
(3) Select ERASE ALL in the menu settings. Turn
the SEL/PUSH EXEC dial to select EXECUTE,
then press the dial.
All the programme marks flash, then the
settings are cancelled.
To cancel erasing all programmes
Select RETURN in step 3.
To cancel a programme you have set
Press MENU.
The programme is stored in memory until the
tape is ejected.
Note
You cannot operate recording during Digital
program editing.
On a blank portion of the tape
You cannot set IN or OUT on blank portions of
the tape.
If there is a blank portion between IN and
OUT on the tape
The total time code may not be displayed
correctly.
Operation 2: Performing the
programme
(Dubbing a tape)
Make sure your camcorder and VCR are
connected, and that the VCR is set to recording
pause. (When you use the i.LINK cable (DV
connecting cable) this procedure is not
necessary.)
When you use a digital video camera recorder,
set its power switch to VCR/VTR.
(1) Select VIDEO EDIT in the menu settings. Turn
the SEL/PUSH EXEC dial to select TAPE,
then press the dial (except DCR-TRV16E/
TRV116E).
(1)
(2)
(3)
2
(1)
117