Sony DCR- TRV24E Operating Instructions Manual page 68

Using the fader function
(1) When fading in [a]
In the standby mode, press FADER until the
desired fader indicator flashes.
When fading out [b]
In the recording mode, press FADER until the
desired fader indicator flashes.
The indicator changes as follows:
FADER t M. FADER t BOUNCE t
MONOTONE t OVERLAP t WIPE t
DOT t no indicator
The last selected fader mode is indicated first
of all.
(2) Press START/STOP. The fader indicator stops
flashing, then light up.
After fade in/out ends, your camcorder
automatically returns to the normal mode.
To cancel the fader function
Before pressing START/STOP, press FADER
until the indicator disappears.
68
(1)
(2)
START/STOP
1
t
t
t
FADER
FADER
[a]
[b]
t t
t t