Sony DCR- TRV24E Operating Instructions Manual page 65

Adjusting the white balance
manually
If the picture is being taken in a studio lit by
TV lighting
We recommend that you record in the INDOOR
mode.
When you record under fluorescent lighting
Use the AUTO or HOLD mode.
Your camcorder may not adjust the white
balance correctly in the INDOOR mode.
In the automatic white balance mode
Point your camcorder at a white subject for about
10 seconds after setting the POWER switch to
CAMERA to get a better adjustment when:
– you detach the battery for replacement.
– you take your camcorder outdoors from inside
a house holding the exposure, or vice versa.
In the HOLD white balance mode
Set the white balance to AUTO and reset to
HOLD after a few seconds when:
– you change the PROGRAM AE mode.
– you take your camcorder outdoors from inside
a house, or vice versa.
65