Dv Connecting Cable - Sony DCR- TRV24E Operating Instructions Manual

Dubbing only desired scenes
– Digital program editing (on
tapes)
Step 2: Setting the VCR to
operate with the i.LINK
cable

(DV connecting cable)

When you connect using the i.LINK cable (DV
connecting cable) (optional), follow the
procedure below.
(1) Set the POWER switch to PLAYER*
on your camcorder.
(2) Turn the power of the connected VCR on,
then set the input selector to DV input. When
you connect a digital video camera recorder,
set its power switch to VCR/VTR.
(3) Press MENU. Select VIDEO EDIT in
the SEL/PUSH EXEC dial (p. 242).
(4) Turn the SEL/PUSH EXEC dial to select
TAPE, then press the dial (except DCR-
TRV16E/TRV116E).
(5) Turn the SEL/PUSH EXEC dial to select
EDIT SET, then press the dial.
(6) Turn the SEL/PUSH EXEC dial to select
CONTROL, then press the dial.
(7) Turn the SEL/PUSH EXEC dial to select
i.LINK, then press the dial.
1)
* DCR-TRV16E/TRV18E/TRV24E only
2)
* DCR-TRV25E/TRV27E/TRV116E/TRV118E
only
1) 2)
/VCR*
(1)
(2)
with
(3)
(4)
(5)
(6)
(7)
1)
2)
2
1) 2)
111