Connecting To A Wall Socket - Sony DCR- TRV24E Operating Instructions Manual

Step 1 Preparing the power
supply

Connecting to a wall socket

When you use your camcorder for a long time,
we recommend that you power it from a wall
socket using the AC power adaptor.
(1) Open the DC IN jack cover. Connect the AC
power adaptor supplied with your camcorder
to the DC IN jack on your camcorder with the
plug's v mark facing up.
(2) Connect the mains lead to the AC power
adaptor.
(3) Connect the mains lead to a wall socket.
1
PRECAUTION
The set is not disconnected from the AC power
supply (wall socket) as long as it is connected to
the wall socket, even if the set itself has been
turned off.
Notes
•The AC power adaptor can supply power even
if the battery pack is attached to your
camcorder.
•The DC IN jack has "source priority." This
means that the battery pack cannot supply any
power if the AC power adaptor is connected to
the DC IN jack, even when the mains lead is not
plugged into a wall socket.
Using a car battery
Use a Sony Car Battery Adaptor (optional). Refer
to the operating instructions of the Car Battery
Adaptor for further information.
30
(1)
(2)
(3)
2, 3
v