Inserting A Scene From A Vcr - Insert Editing - Sony DCR- TRV24E Operating Instructions Manual

Inserting a scene from
a VCR
– Insert Editing
– DCR-TRV25E/TRV27E/TRV116E/
TRV118E only
You can insert a new scene with sound from a
VCR onto your originally recorded tape by
specifying the insert start and end points. Use the
Remote Commander for this operation.
Connections are the same as on page 119 or 121.
Insert a cassette containing the desired scene to
insert into the VCR.
[A]
[B]
[C]
[A]: A tape that contains the scene to be
superimposed
[B]: A tape before editing
[C]: A tape after editing
(1) Set the POWER switch to VCR on your
camcorder.
(2) On the connected VCR, locate just before the
insert start point [a], then press X to set the
VCR to the playback pause mode.
(3) On your camcorder, locate the insert end
point [c] by pressing m or M. Then press
X to set your camcorder to the playback
pause mode.
(4) Press ZERO SET MEMORY on the Remote
Commander. The ZERO SET MEMORY
indicator flashes and the end point of the
insert is stored in memory. The tape counter
shows "0:00:00."
[a]
[b] [c]
[A]
[B]
[C]
(1)
(2)
X
(3)
[c]
(4)
[a]
m M
X
123