Sony DCR- TRV24E Operating Instructions Manual page 221

Viewing images recorded on a
tape with your computer
– For Windows users
If image data cannot be transferred by the
USB connection
The USB driver has been registered incorrectly as
your computer was connected to your camcorder
before installation of the USB driver was
completed. Reinstall the USB driver following the
procedure on page 214.
If any trouble occurs
Close all running applications, then restart your
computer.
Carry out the following operations after
quitting the application:
– Disconnect the USB cable.
– Set the POWER switch to the other position or
OFF (CHG) on your camcorder.
Seeing the on-line help (operating
instructions) of "PIXELA
ImageMixer Ver.1.0 for Sony"
A "PIXELA ImageMixer Ver.1.0 for Sony" on-line
help site is available where you can find the
detailed operating method of "PIXELA
ImageMixer Ver.1.0 for Sony".
(1) Click button located in the upper-right
corner of the screen.
The ImageMixer's Manual screen appears.
(2) You can find the information you need from
the list of contents.
To close on-line help
Click the button at the top right of the screen.
If you have any questions about "PIXELA
ImageMixer Ver.1.0 for Sony"
"ImageMixer Ver.1.0 for Sony" is a trademark of
PIXELA corporation. For more information, refer
to the instruction manual of the CD-ROM
supplied with your camcorder.
Notes on using your computer
Communications with your computer
Communications between your camcorder and
your computer may not recover after recovering
from Suspend, Resume, or Sleep.
(1)
(2)
221