Installing The Usb Driver - Sony DCR- TRV24E Operating Instructions Manual

Connecting your camcorder to
your computer using the USB
cable – For Windows users

Installing the USB driver

Start the following operation without
connecting the USB cable to your
computer.
Connect the USB cable according to
"Making the computer recognise the
camcorder".
If you are using Windows 2000 Professional or
Windows XP Home Edition/Professional, log in
with permission of Administrators.
(1) Turn on your computer and allow Windows
to load.
(2) Insert the supplied CD-ROM in the CD-ROM
drive of your computer. The application
software starts up and the title screen appears.
(3) Move the cursor to "USB Driver" and click.
This starts USB driver installation.
(4) Follow the on-screen messages to install the
USB driver.
(5) Remove the CD-ROM and then restart the
computer, in accordance with the instructions
on the screen.
Note
If you connect the USB cable before USB driver
installation is complete, the USB driver will not
be properly registered. Carry out installation
again in accordance with the steps on page 214.
Windows XP Home Edition/Professional users
If you go to USBCONNECT in the menu settings
and select PTP, you can copy "Memory Stick"
images from the camcorder onto your computer
without installing the USB driver. This is ideal
for simply copying images from a camcorder
onto a computer. Refer to page 241 for details.
210
(1)
(2)
(3)
(4)
(5)