Sony DCR- TRV24E Operating Instructions Manual page 213

Connecting your camcorder to
your computer using the USB
cable – For Windows users
Viewing images recorded on a
"Memory Stick"
– Except DCR-TRV16E/TRV116E
Before operation
Set USBCONNECT in
menu settings. (The default setting is NORMAL.)
(1) Insert a "Memory Stick" into your camcorder.
(2) Connect the AC power adaptor and set the
POWER switch to MEMORY.
(3) Connect the (USB) jack on your camcorder
with the USB jack on your computer using the
supplied USB cable.
"USB MODE" appears on the LCD screen of
your camcorder. Your computer recognises
the camcorder, and the Add Hardware
Wizard starts.
(4) Follow the on-screen messages so that the
Add Hardware Wizard recognises that the
USB drivers have been installed. The Add
Hardware Wizard starts two times because
two different USB drivers are installed. Be
sure to allow each installation to complete
without interrupting them.
You cannot install the USB driver if a
"Memory Stick" is not in your camcorder
Be sure to insert a "Memory Stick" into your
camcorder before installing the USB driver.
to NORMAL in the
(USB) jack/
Push into the end/
(1)
(2)
(3)
USB cable (supplied)/
(4)
USB jack/
213