Sony DCR- TRV24E Operating Instructions Manual page 238

Changing the menu settings
Icon/item
MEMORY SET (except DCR-TRV16E/TRV116E)
PRINT MARK
PROTECT
SLIDE SHOW
PHOTO SAVE
FILE NO.
DELETE ALL
FORMAT
Notes on formatting (except DCR-TRV16E/TRV116E)
•Supplied or optional "Memory Stick"s have been formatted at factory. Formatting "Memory Stick"s
on your camcorder is not required.
•Do not do any of the following while FORMATTING is displayed:
– Switch the POWER switch
– Operate buttons
– Eject the "Memory Stick"
•You cannot format the "Memory Stick" if the write-protect tab on the "Memory Stick" is set to LOCK.
•Format again if the message "
•Formatting erases protected image data on the "Memory Stick."
238
Mode Meaning
ON To write a print mark on recorded still images you
want to print out later (p. 199)
z OFF To cancel print marks on still images
ON To protect selected still images against accidental
erasure (p. 195)
z OFF To not protect still images
— To play back images in a continuous loop
(p. 193)
— To copy mini DV still images on "Memory Stick"
(p. 179)
z SERIES To assign numbers to file in sequence even if the
"Memory Stick" is changed
RESET To reset the file numbering each time the "Memory
Stick" is changed
— To delete all unprotected images (p. 198)
z RETURN To cancel formatting
OK To format an inserted "Memory Stick"
Formatting erases all information on the "Memory
Stick".
Check the contents of the "Memory Stick" before
formatting.
1. Select FORMAT with the SEL/PUSH EXEC dial,
then press the dial.
2. Turn the SEL/PUSH EXEC dial to select OK, then
press the dial.
3. After "EXECUTE" appears, press the SEL/PUSH
EXEC dial. "FORMATTING" flashes during
formatting. "COMPLETE" appears when
formatting is finished.
FORMAT ERROR" appears.
POWER
switch
PLAYER/VCR
MEMORY
PLAYER/VCR
MEMORY
MEMORY
PLAYER/VCR
PLAYER/VCR
MEMORY
MEMORY
MEMORY