Quickly Locating A Scene - Zero Set Memory - Sony DCR- TRV24E Operating Instructions Manual

Quickly locating a
scene
– ZERO SET MEMORY
Your camcorder goes forward or backward to
automatically stop at a desired scene having a
tape counter value of "0:00:00". Use the Remote
Commander for this operation.
(1) In the playback mode, press DISPLAY.
(2) Press ZERO SET MEMORY at the point you
want to locate later. The tape counter shows
"0:00:00" and then starts counting. The ZERO
SET MEMORY indicator flashes.
(3) Press x when you want to stop playback.
(4) Press m to rewind the tape to the tape
counter's zero point. The tape stops
automatically when the tape counter reaches
approximately zero. The ZERO SET
MEMORY indicator disappears, and the time
code appears.
(5) Press N. Playback starts from the counter's
zero point.
Notes
•When you press ZERO SET MEMORY before
rewinding the tape, the zero set memory
function will be cancelled.
•There may be a discrepancy of several seconds
from the time code.
If a tape has a blank portion between
recorded portions
The zero set memory function may not work
correctly.
DISPLAY
m
x
(1)
(2)
(3) x
(4) m
(5)
N
ZERO SET
MEMORY
N
91