Inserting A Scene From A Vcr – Insert Editing - Sony DCR- TRV24E Operating Instructions Manual

Inserting a scene from a VCR
– Insert Editing
(5) On your camcorder, locate the insert start
point [b] by pressing m, then press z REC
and the button on its right simultaneously.
(6) First press X on the VCR, and after a few
seconds press X on your camcorder to start
inserting the new scene with sound.
Inserting automatically stops near the zero
point on the tape counter. Your camcorder
automatically stops recording and the ZERO
SET MEMORY is cancelled.
4
ZERO SET
MEMORY
To change the insert end point
Press ZERO SET MEMORY again after step 5 to
erase the ZERO SET MEMORY indicator and
begin from step 3.
Note
Pictures and sound recorded on the portion
between the insert start and end points will be
erased when you insert the new scene.
If you insert scenes on the tape recorded on
another camcorder
The pictures and sound may be distorted. We
recommend that you insert scenes on a tape
recorded on your camcorder.
When the inserted picture is played back
Pictures and sound may be distorted at the end
of the inserted portion. This is not a malfunction.
Pictures and sound at the start point and the end
point may be distorted in the LP mode.
To insert a scene without setting the insert
end point
Skip steps 3 and 4. Press x on your camcorder
when you want to stop inserting.
124
0:00:00
ZERO SET
MEMORY
(5)
[b]
z
(6)
X
x
m
X
5
REC