Identifying parts and controls
To prepare the Remote Commander
Insert two R6 (size AA) batteries by matching the
+ and – on the batteries to the + and – in the
battery compartment.
Notes on the Remote Commander
•Point the remote sensor away from strong light
sources such as direct sunlight or overhead
lighting. Otherwise, the Remote Commander
may not function properly.
•Your camcorder works in the Commander
mode VTR 2. Commander modes
1, 2 and 3 are used to distinguish your
camcorder from other Sony VCRs to avoid
erroneous remote control operation. If you use
another Sony VCR in the Commander mode
VTR 2, we recommend changing the
Commander mode or covering the sensor of the
VCR with black paper.
299