Using The I.link Cable (Dv Connecting Cable) - Sony DCR- TRV24E Operating Instructions Manual

Dubbing a tape
Using the i.LINK cable (DV
connecting cable)
Simply connect the i.LINK cable (DV connecting
cable) (optional) to DV OUT or DV IN/OUT
jack on your camcorder and to DV IN on the DV
products. With a digital-to-digital connection,
video and audio signals are transmitted in digital
form for high-quality editing. You cannot dub
the titles, display indicators, the contents of
cassette memory or letters on the "Memory
Stick" index screen (except DCR-TRV16E/
TRV116E).
Set the input selector on the VCR to the DV input
position if the VCR is equipped with the input
selector.
(1) Insert a blank tape (or a tape you want to
record over) into the VCR, and insert the
recorded tape into your camcorder.
(2) Prepare the VCR for recording.
Set the input selector to LINE (DV input
position). Refer to the operating instructions
of the VCR.
(3) Set the POWER switch to PLAYER*
on your camcorder.
(4) Play back the recorded tape on your
camcorder.
(5) Start recording on the VCR. Refer to the
operating instructions of your VCR.
1)
* DCR-TRV16E/TRV18E/TRV24E only
2)
* DCR-TRV25E/TRV27E/TRV116E/TRV118E
only
102
: Signal flow/
(1)
(2)
1) 2)
/VCR*
(3)
(4)
(5)
1)
2)
DV IN/OUT
i.LINK cable (DV connecting cable) (optional)/
1) 2)
DV
DV IN