Sony DCR- TRV24E Operating Instructions Manual page 163

Superimposing a still image in
the "Memory Stick" on an image
– MEMORY MIX
To change the still image to
superimpose
Do either of the following:
– Press MEMORY –/+ before step 6.
– Press the SEL/PUSH EXEC dial before step 6,
and repeat the procedure from step 4 (except
for M. OVERLAP).
To change the mode setting
Press the SEL/PUSH EXEC dial before step 6,
and repeat the procedure from step 4 (except for
M. OVERLAP).
To cancel MEMORY MIX
Press MEMORY MIX.
Notes
•You cannot use the MEMORY MIX function for
moving pictures recorded on "Memory Stick"s.
•When the overlapping still image has a large
amount of white, the thumbnail image of the
picture may not be clear.
Image data modified on your computer or
shot with other equipment
You may not be able to play back modified
images with your camcorder.
When you select M. OVERLAP
You cannot change the still image or the mode
setting.
During recording
You cannot change the mode setting.
To record the superimposed image as a still
image
Press PHOTO deeper in step 7.
Before operation, select PHOTO REC in
TAPE in the menu settings (p. 235).
to
163