Capturing Images From An Analog Video Unit On Your Computer - Signal Convert Function - Sony DCR- TRV24E Operating Instructions Manual

Capturing images from an analog
video unit on your computer
– Signal convert function
– DCR-TRV25E/TRV27E/TRV116E/
TRV118E only
You can capture images and sound from an
analog video unit connected to your computer
which has the i.LINK (DV) jack connected to
your camcorder.
Before operation
Set DISPLAY in
(The default setting is LCD.)
(1) Set the POWER switch to VCR.
(2) Set A/V t DV OUT in
menu settings (p. 236).
(3) Start playback on the analog video unit.
(4) Start procedures for capturing images and
sound on your computer. The operation
procedures depend on your computer and the
software you are using.
For details on how to capture images, refer to
the instruction manuals of your computer and
software you are using.
AUDIO/VIDEO
OUT
S VIDEO
VIDEO
AUDIO
VCR/
230
: Signal flow/
to LCD in the menu settings.
to ON in the
Yellow/
A/V connecting cable (supplied)/
Red/
White/
(1)
(2)
(3)
(4)
DV IN/OUT
i.LINK cable (DV connecting cable) (optional)/
t
i.LINK