Sony DCR- TRV24E Operating Instructions Manual page 164

Superimposing a still image in
the "Memory Stick" on an image
– MEMORY MIX
Recording superimposed
images on a "Memory Stick" as
a still image
Image size is automatically set to 640
Before operation
Insert a "Memory Stick" including still images
into your camcorder.
(1) Set the POWER switch to MEMORY. Make
sure that the LOCK switch is set to the left
(unlock) position.
(2) Press MEMORY MIX.
The last recorded or composed image appears
on the lower part of the screen as a thumbnail
image.
(3) Press MEMORY –/+ to select the image you
want to superimpose.
MEMORY – : To display the previous image
MEMORY + : To display the following image
(4) Select the desired mode with the SEL/PUSH
EXEC dial.
The mode changes as follows:
M. CHROM y M. LUMI y C. CHROM
(5) Press the SEL/PUSH EXEC dial.
The still image is superimposed on the
moving picture.
(6) Turn the SEL/PUSH EXEC dial to adjust the
effect.
M. CHROM
M. LUMI
C. CHROM
The fewer bars there are on the screen, the
stronger the effect.
164
480.
– Blue chroma key (blue
background) to extract a still
image and superimpose it
on a moving picture
– Brightness level used when
extracting a still image and
superimposing it on a
moving picture
– Blue chroma key (blue
background) to extract a
moving picture and
superimpose it on a still
image
(1)
(2)
(3)
(4)
y
(5)
(6)
y