Table of Contents
Advertisement
Vetting startea
Gariceliarem-lalemlaciccliiiale mcatem st-lac-lavm asta.
Before using your camcorder, you first need to charge and install the battery pack. To charge the battery
pack, use the supplied AC-V25/V25A/V25B AC power adaptor.
Charging the Battery Pack
Charge the battery pack on a flat place without vibration.
(1) Connect the AC power adaptor to a wall outlet. (2) Align the right side of the battery pack with the
line on the AC power adaptor, then slide the battery pack in the direction of the arrow. (3) Set the
'
selector to CHARGE. The POWER lamp (green) and the CHARGE lamp (orange) light up. Charging
begins.
When charging is completed, the CHARGE lamp goes out. Set the selector to the center position and
unplug the unit from the wall outlet. Then remove the battery pack and install it on the camcorder. To
\
stop charging, set the selector to the center position.
|
1
Charging Time
spp)
[Charging
time' [70
* Approximate minutes to charge an empty pack using the AC-V25/V25A/V25B (Lower temperatures
require a longer charging time.)
Battery Life
CCD-TR42/TR72
Battery Pack
Typical recording time**
| 45
Continuous recording time***
| 8
|
CCD-TR70/TR8O
Battery pack
NP-55
Typical recording time**
| 30 |
Continuous recording time*** | 6
Advertisement
Table of Contents
